FAQs - Page 5 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

Sample Inbound Rate Limiter configuration for the SecureStacks

Article ID: 11321 Products C5-Series, all firmware C3-Series, firmware 1.01.01.0039 and higher C2-Series, firmware 3.03.23 and higher B5-Series, all firmware B3-Series, firmware 1.01.01.0039 and higher B2-Series, firmware 3.00.14 and higher Goals ...

SecureStack will not accept Cos Settings: "Could not set the COS parameter

Article ID: 10323 Products SecureStack C5, C3, C2, B5, B3, B2 Changes Issued the 'code:set cos settings <index> code:priority...' command. Symptoms The command was not accepted. "Could not set the COS parameter" For example: C3(rw)->set cos se...

LACP Partner Information is Persistent

Article ID: 11319 Products Securestack A2, A4, B2, B3, B5, C2, C3, C5 D-Series G-Series I-Series Changes Formed a Dynamic LAG, then detached the LAG peers to remove the LAG. Symptoms The ports are removed from the LAG, but the partner's LACP info...

Monitoring LAG utilization with NetSight

Article ID: 11543 Product NetSight Console Goals Monitor the utilization of LAG ports with NetSight Console Solution Right click on My Network folder in the device tree and select Add Device Group. Provide a name for this group. This group will ...

Any incompatibility switch A2H124-24P, with some micro controller Ethernet.

I need to know if there is any incompatibility switch A2H124-24P, with some micro controller Ethernet? More specifically W5200

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN