Thanks for your interest in this.
Here is a screenshot of the fresh reboot and sh log command. Short answer, nothing that I can see in log.
Version 7.8e.4.1 [ssh] by Build_Master on 03/18/11 03:34:35
System Serial Number: 0517G00681
Memory Size: 268435456 (256MB)!
login: gordontech
password:
Extremeware
Copyright (C) 1996-2008 Extreme Networks. All rights reserved.
Protected by U.S Patent Nos 6,678,248; 6,104,700; 6,766,482; 6,618,388; 6,034,957; 6,859,438; 6,912,592; 6,914,905; 5,694,436
=============================================================================================================================
Press the key at any time for completions.
Remember to save your configuration changes.
* 2Stack # sh log
10/02/2014 20:17:51.91 Port 2:13 link active 1000Mbs FULL duplex
10/02/2014 20:17:50.50 gordontech logged in through console
10/02/2014 20:17:44.06 Done initializing base module
10/02/2014 20:17:41.20 Start initializing base module
10/02/2014 20:17:40.08 Done initializing base module
10/02/2014 20:17:38.17 Start initializing base module
10/02/2014 20:17:37.97 Power up card 2
10/02/2014 20:17:37.87 Power up card 1
10/02/2014 20:17:34.72 Rmon Memory Allocated : 7340032
10/02/2014 20:17:34.38 SNMPv3 Engine boot count 0x99
10/02/2014 20:16:33.06 NV:Using primary config database from FLASH
10/02/2014 20:16:26.54 Memory has been allocated for gSystem
10/02/2014 20:16:01.13 System rebooted
10/02/2014 19:23:06.88 System rebooted
10/02/2014 19:12:45.23 System rebooted
10/02/2014 18:45:16.15 Login failed for user admin through console
10/02/2014 18:43:31.09 System rebooted
10/02/2014 18:26:05.60 Login failed for user admin through console
10/02/2014 18:23:15.65 System rebooted
Displayed 19 messages from memory-buffer.
* 2Stack #
