Hi Team, I´m bit confused about use SLPP in SPB net. I read that SLPP bpdus can´t travel trought NNI links, so you can´t enable on it, so: In COREs: -Enable SL...
...edicated public subnet. * the setup use a L3VSN into the VRF between this client VLAN and the 2 VLANs dedicated to BGP peering. All is working fine, access switch retrieve default external route to e...
Hello, my name is Mike and I am new to the extreme world and was wondering if someone could please shed some light on setting up a new extreme 5520-48w POE switch. I am trying to configure VLAN manag...
Hi, We recently create L3 fabric extend logical interfaces to extend fabric through a wireless bridge following this article: How To: How to configure L3 Fabric Extend on VSP4K and VSP7/VSP8K. ...
Are there any statistics exposed for an MLT, or only its component interfaces? The MLT exists under ENTITY-MIB but nowhere else that I can find with an snmpwalk: SNMPv2-SMI::mib-2.47.1.2.1.1.2.6290 ...
Hi, we want to redesign our vlan architecture and move from location based vlans to device based vlans ( e.g all printers in a one vlan ). I would need to create the vlan on 35 VOSS Access Switches ...
Hello, I'm quite lost (new to VOSS). I disabled POE on a port by "poe poe-shutdown port 1/11" but how do I re-enable it?? No.... doesn't work in this case. Pls help! 🙂 __Leo
Hi guys, maybe it's a stupid question... but despite all the training I've done, so far I haven't been able to get this. Could anyone recommend what best practices would be for migrating from a tradi...
We are planning to upgrade the firmware of these below Devices to a latest update Device Type Family Present Firmware VSP-4850GTS-PWR+ VSP Series 6.1.2.0 5420F-48P-4...