Extreme Networks

mike71 · 06-30-2024

Hello, my name is Mike and I am new to the extreme world and was wondering if someone could please shed some light on setting up a new extreme 5520-48w POE switch. I am trying to configure VLAN management through the fiber VIM module. Currently the s...

mike71 · 12-10-2023

I have a 4950GTS switch i am building and i noticed when i connect another switch to a port as a trunk port, the port on both of my switches gets disabled and the only way to fix it is to log into both switches and manually enable the ports. What com...

mike71 · 07-05-2024

Ok well then thats awesome!! When i tried to program the MGMT OOB port with an IP Address it barked at me and said..... "Error: Mgmt ipv4 address should not overlap with mgmt ipv4 address in other instances". When i read that i just gave up since i d...

mike71 · 07-05-2024

Jave, thanks for this info. Once i added the vlan ID after "Vlan MGMT <ID>" , it worked great. One thing i did read though and im not sure if this made a difference or not, but apparently the VIM module doesnt start off configured as uplink ports. Y...

mike71 · 07-02-2024

Hi Jave, no luck with the config setup you sent. Not sure why it doesnt work since thats the typical setup i have found when trying to setup a MGMT Vlan. I did read a little about Clip, but not sure if that applies to my case. There must be an easier...

mike71 · 07-01-2024

Hi Jave, thanks for getting back to me with this potential solution. Since im using the Voss OS, my fiber connections on the VIM module are labeled as 2/1, 2/2, 2/3, and 2/4 as shown on the GUI. So in reference to your example above im using VIM Inte...

Extreme Networks

User Statistics

User Activity

Extreme 5520 VLAN Management w/VOSS

ERS 4950GTS, what command prevents the switch from auto disabling ports?

Re: Extreme 5520 VLAN Management w/VOSS

Re: Extreme 5520 VLAN Management w/VOSS

Re: Extreme 5520 VLAN Management w/VOSS

Re: Extreme 5520 VLAN Management w/VOSS