General Network Management
Questions and discussions about general network management practices
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

XMC MAP shows link partially down

Have MLT with two ports (1/1 and 1/2) between two VSP 8404 switches both discovered by XMC 8.5.2.6but link shows Partially Down and not recognising that port 1/1 has been fixed. Port 1/1 was down for sometime and has recently come up after a faulty f...

RobertD1 by Contributor II
  • 446 Views
  • 0 replies
  • 0 kudos

ERS 4850 SNMP

Is it possible to use SNMP (v2c) on the ERS 4850 to configure a RADIUS server? If not that, is it possible to set the login to use local instead of RADIUS, also via SNMP? We have a few switches that someone configured with an incorrect IP and we’re u...

bfaltys by Contributor II
  • 1452 Views
  • 2 replies
  • 0 kudos

RMK for X460G2 (4 post)

I’m trying to find a 4 post RMK for the X460G2 model of switch.  We have a 2 post RMK right now, but the switches are sagging in the back.We have a 4 post RMK for X450G2, but that kit won’t work for the X460G2, as they X460G2 doesn’t have the nobs on...

B_ by New Contributor II
  • 1517 Views
  • 3 replies
  • 0 kudos
GTM-P2G8KFN