double tag dhcp ip allocation

[sumeet]

we have summit x460-24t extreme networks switch . I want to trunk port to send and receive double tagged ports and allocate IP addresses via DHCP .
example : -say outer vlan (service vlan) is x and inner vlan (customer vlan) is y . Then it should allocate IP address from a particular pool .
Currently we have following setting for single tagged vlan which works well .

create vlan "vlan400"
configure vlan vlan400 tag 400
configure vlan vlan400 ipaddress 172.16.96.33 255.255.255.248
enable ipforwarding vlan vlan400
configure vlan vlan400 dhcp-address-range 172.16.96.34 - 172.16.96.38
configure vlan vlan400 dhcp-options default-gateway 172.16.96.33
configure vlan vlan400 dhcp-options dns-server 196.1.105.47
enable dhcp ports 21-24 vlan vlan400

Thanks .

[MANAS_BEHERA]

Hi Sumeet,

Please follow the link.
https://community.extremenetworks.com/extreme/topics/vman_qinq_on_summit_450-nwxcj

Regards,
Manas Ranjan

[Karthik_Mohando]

Hi Sumeet,

I believe you are looking to provide IP-address to hosts which are present in the Customer VLAN.... where this customer VLAN is not present in the X460-24t and the switch only provides VMAN services... please correct me if my understanding is wrong on the same.