Hello,
I have many VLANs running on the below topology, one of them is SCADA, my requirement is simple, Creating a policy that gives priority to the SCADA Vlan on all switches.
All switches are working on L2, Except for the Core "the big one" is working L3 and doing the inter-VLAN routing.
Can you kindly give me a sample config or walk me through the required steps?
Switches used:
- X440
- BD8806
![5c45066670e24940beea981c87a279d9_RackMultipart20180307-22914-1arzauq-NMS03_inline.png 5c45066670e24940beea981c87a279d9_RackMultipart20180307-22914-1arzauq-NMS03_inline.png](/t5/image/serverpage/image-id/2332i387746DCF3E01652/image-size/large?v=v2&px=999)
Regards
Yusuf