Network Architecture & Design - Page 53 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

S4 series chassis SLOT 2 COM LED not glowing

We have S4 Series Chassis loaded with S4 Chassis I/O Fabric Module: 48 ports 1000BASE-X at Slot 2.. When we try to communicate with chassis through hyper terminal, there is no response. We notified that LED on the chasis for slot 2 is not blinging....

Connecting a 100M switch to a 1G switch with fiber

If you have one 100 meg switch and one gig switch does the fiber have to have converter so they can see each other. Is a converter required? Had a splicer come in to repair fiber between two building one 100 meg and the other is a gig switch

OneView, whats the difference between basic and full versions?

I currently have NMS-Base-XX and I am looking into what features the other licenses give me that Base doesn't and one of them is a full OneView interface, what does this version have the basic doesn't?

no access via console switch 08g20g4

I've got a problem with the access to switches 08g20g4-24p. I set parameter correctly but I can't enter on the switch. By web browser there are no problems, but icon of console is always light off. My cable is ok, because it work with other devices. ...

Enterasys commands to Extreme equivalent commands

Hello, So we are now starting to put in more and more Extreme switches into clients buildings. But I have use Enterasys before that. My self I am still not getting use to all the different commands and hopping there is a equivalent command to some ...

Top Kudoed Authors

User

Count

4

3

3

2

GTM-P2G8KFN