Extreme VSS and NFS (CISCO)

[Tavares_Belmont]

Hello guys,

I would like to connect two switches stack and configure they like a NFS or VSS like cisco devices, to provide more redundancy if one member fail all traffic, RIB, mac-table and so on will be forwarded to another member, its possible do it with extreme switch?

[An-Tin_Liu]

VSB is a good solution, one config one IP ,i have 3 customer they choice VSB to depoly thier network. the distance with two core is 250M.

[Bill_Stritzinge]

If you enable MVRP where the VLAN can dynamically create and tear down (similar to GVRP). So the answer is yes you can automate the configuration either with that or with some minimal scripting or using Netsight management.

[Tavares_Belmont]

OK, I got it,

But let's say if I want to configure a vlan on one of the equipment, the configuration is replicated to the other switch stack automatcally?

[Bill_Stritzinge]

Tavares,

MLAG would let you take the two stacks and they would act as one, but you have to configure as two separate switches.

Bill