Looking for a primer on SNMP Configuration - mostly HW faults

[Bruce_Garlock]

Hi all,

I have a couple of brand new x-460's, and being new to Extreme, I was looking for a SNMP configuration guide. The main things I want to monitor are PS failures, or fan failures.

I can certainly sleep a lot better with redundant power supplies now! However, I still need to be notified if one goes out.

We use Solarwinds NCM for configuration backups, so I was hoping to send traps to that if possible.

Many thanks,
Bruce

[Bruce_Garlock]

Hi @tdj7397 - I ended up downloading this script for Nagios, and pulled apart the Extreme related OID's. This allowed me to integrate with our Nagios install and I double checked our dual-power supply Extreme switches by pulling the power on one PS, and got the needed alerts.

https://exchange.nagios.org/directory/Plugins/Hardware/Network-Gear/Cisco/Check-various-hardware-env...

There's info for other vendors in that script as well, which also turned out to be very useful for us.

[Erik_Auerswald]

Hi Bruce,

see How to add a trap receiver on how to send SNMP traps from EXOS devices.

Erik

[tdj7397]

@Bruce Garlock Hi Bruce, I'm looking for something similar and was wondering if you ever came across a good list of OIDs or anything for these basic HW failure traps etc.

[Jeremy_Gibbs]

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-set-up-SNMPv3-on-EXOS