We have a collapsed core, with two x-460's using VRRP and MLAG for redundancy. All edge switches are trunked to these redundantly. We have several VLAN's, including one for VOIP. Wouldn't it make sense to turn on gratuitous arp protection for our ...
We have (2) x-460's using MLAG as our core layer, with 8 access layer switches connected to the 460's redundantly. We need to be able to route multicast traffic between our server VLAN and our desktop VLAN. We plan on following this article: https://...
Hello,
We have a pair of x460-G2's running VRRP and MLAG at two sites. They are currently running 16.1.3.6, and I would like to apply the current recommended firmware 16.2.2.4. This is the first time I have had to update the firmware while running...
Hi all,
I have a couple of brand new x-460's, and being new to Extreme, I was looking for a SNMP configuration guide. The main things I want to monitor are PS failures, or fan failures.
I can certainly sleep a lot better with redundant power sup...
Coming from a HP Procurve world, we could have 'ip helper-address' settings for each VLAN. How can I have a production VLAN have a different DHCP server from a Guest VLAN in EXOS?
Here's my procurve settings:
vlan 200 name "VLAN200" ip h...
I am in a similar situation. I'm wondering how things went for you? I was thinking about 700ms for the timers. Kind of the middle between the 300 and 1000.
Hi @tdj7397 - I ended up downloading this script for Nagios, and pulled apart the Extreme related OID's. This allowed me to integrate with our Nagios install and I double checked our dual-power supply Extreme switches by pulling the power on one PS,...
My "Holy Grail" would be to have our entire environment in GNS3 and be able to test out changes before making in Prod. Having the 48 ports on a switch would be so helpful in heading towards that goal.
It's good to know that we can at least mimic ...
Hello,
I am wondering what @kjstech and @Patrick Voss came up with for making this work, as I am on a similar journey. Basically, I would like to pin the current MAC addresses to a port (what ever is plugged in right now) and if a new device is at...
