cancel
Showing results for 
Search instead for 
Did you mean: 

XMC Alarm Mail Delay Config

XMC Alarm Mail Delay Config

Furkan_Sabanci
New Contributor
Hi All,

I have alarm config on xmc, it's emailing me when device down and all working fine.
There are a lot of locations in the company and there can be electricity issues in short-term, approx 5 mins.
I don't want to get email in this 5 minutes, I just want it to wait for 5 minute and if still in down state then email me.

I want to know if I have an option in xmc like " email me when device down after 5 minutes" like delay email action. Because in five minutes the device comes up generally.

Thanks for your help
Furkan
5 REPLIES 5

Zdeněk_Pala
Extreme Employee

The firts alarm should trigger workflow to go this path:

90afac29d76743018f73f0c929a31bae_83964564-35b9-4b68-abab-17ebef07ff6c.png

Consequent alarms should go this path:

90afac29d76743018f73f0c929a31bae_aced5e1b-4ad7-44f4-8280-710f42222840.png

 

What version of workflow do you have? for XMC 8.4 you need to have workflow v10.

 

Regards Zdeněk Pala

Byron_Morales
New Contributor II

Ok great.

I attached the workflow to the Link Up and Link down Alerts but I’m not getting an email.

The workflow dashboard shows that the workflow completed and I  know email settings are properly configured

Not sure what the issue is.

This is what i see in the workflow output:

Script Name: Aggregated report Link Status_Set_Sempahore
Date and Time: 2020-02-06T11:50:44.569
XMC User: NetSight Server
XMC User Domain:
IP: 10.100.1.1

 

Zdeněk_Pala
Extreme Employee

Yes the counter is based on workflow name.

you can copy the workflow and assign the workflow to different alarm.

Regards Zdeněk Pala

Byron_Morales
New Contributor II

Can the Aggregated report Device down workflow only be used with the Device Down alert?

I like the idea of this workflow a lot but would like to use it in any alert like ,link down or AP down alerts as well.

GTM-P2G8KFN