Network Architecture & Design - Page 62 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

Did NAC Assessment Agent-Based test support ios and Android OS?

Our customer need a function, when user use pad or smart phone connect to wifi and did not install some apps on the pad or smart phone, the want to redirect the web to and tell user to download apps, then they can access the network. I think to use ...

double tag dhcp ip allocation

we have summit x460-24t extreme networks switch . I want to trunk port to send and receive double tagged ports and allocate IP addresses via DHCP . example : -say outer vlan (service vlan) is x and inner vlan (customer vlan) is y . Then it should all...

Switch C5 PoE

Hi. I installed a switch C5 C5K125-48 firmware version 06.81.07.0004, the manual and datasheet for this switch say that have feature PoE, but when I consulted the answer is: - SW_C5_TEEREOB(su)->show inlinepower Detection Mode:auto Unit Status ...

GNS3 EXOS port assignment

Hi all, I'm having a really wierd situation on GNS3. I have 2 EXOS switches on the project, the problem is that interfaces aren't static. If i connect both switches using interface1, it seem to be interface5 if you see the show ports command on the ...

VLAN philosophy - are VLANs necessary?

Hi everyone. I am just wondering what people think about the use of VLANs in a 100% Extreme network (B5 for wired and 5210 wireless)? I've heard things like VLANs are "old school" and there are better ways of doing things now with policy, NetSight,...

Top Kudoed Authors

User

Count

4

3

3

3

GTM-P2G8KFN