Change Port Name SNMP String

[Rodrigo_Barbier]

Hello, I need to change the name of the port SNMP String.

With the command "configure ports 1:3 display-string tester" a string of port really changed, but when I look at the values ​​SNMPWalk return:

IF-MIB :: ifDescr.1003 = STRING: Stack Port 1: 3

What is the command to change this string for example "Stack Port 1: 1" to "tester"

[dflouret]

That command was added in EXOS v15.3...

[Rodrigo_Barbier]

Hi Tyler, tks for reply , but the comand "configure ports 1:3 description-string " does not exist.

can be known whether any other ?

[TylerMarcotte]

Hi Rodrigo, you can use the command "configure ports 1:3 description-string tester" to change the SNMP string.