enterasys A4 Copy firmware From Switch to PC?

[Ali__J]

Greetings to you
I'm tired from searching in Google about " how to save current firmware in switch to PC , The main goal from this is take a backup

I Know how to save config file to my pc it's easy by using this command

A4(su)->show config outfile configs/mysave.cfg

A4(su)->copy configs/mysave.cfg tftp://10.10.10.15/Ali_j_albasri.txt

File transfer operation completed successfully.

so the above command using to save config file to my PC using TFPT ,
we know in Cisco you can save IOS Image by using IOS name and TFTP
Like this command

copy flash/c2960-lanbase-mz.122-25.SEE2/c2960-lanbase-mz.122-25.SEE2.bin tftp:server

so i want to do that in Enterasys switches

[Ronald_Dvorak]

I think the switch is designed that way so I don't see a problem.

The solution to your request is to download the software from the Extreme webpage.

[Ali__J]

John ,
same even if you Type Images "Capital i

Is there a solution to this problem? Frankly Compared with Cisco offers you a quick solution to solve this problem
Is there a solution ?

[John_Valentine]

Looks like Jason tried my next suggestion with the capital "I" instead of "i". Not sure then. So it's either a restriction of the switch and/or firmware, or perhaps it cannot be done with the file that's the active/boot firmware image. Not sure why that would be the case, but I've seen stranger things. My previous success was with S-Series switch.

[Jason_Parker]

Same here on a G3

Filename: g3-series_06.61.09.0003 (Active) (Boot) <-----------------------
Version: 06.61.09.0003
Size: 10576896 (bytes)
Date: Wed May 22 06:27:46 2013
CheckSum: a745f2ba342627abcf036186d8c5b565
Compatibility: G3G124-24, G3G124-24P, G3G170-24

Files: Size
================================ ========
configs:
JasonsPoe 92261
10-23-2012.cfg 14577
G3Lab.cfg 8293
G3GQuerierandVLAN3-4-308.cfg 8293
G3routngospf.cfg 8293
MyG3Ghost 2149
Portmirrorand-Ghost.cfg 6245
G3Routing.cfg 10341
before-upgrade-6-61-08-0013.cfg 14577
G3G124-24P-198-200-2014.cfg 16645
logs:
current.log 512017
secure:
secure/logs:
G3G124-24P-198-200(su)->copy Images/g3-series_06.61.09.0003 tftp://10.58.196.5/g3-series_06.61.09.0003
Error: Couldn't open source file!

G3G124-24P-198-200(su)->copy Images/g3-series_06.61.09.0003 tftp://10.58.196.5/g3-series_06.61.09.0003
Error: Couldn't open source file!
G3G124-24P-198-200(su)->

G3G124-24P-198-200(su)->
G3G124-24P-198-200(su)->copy Images/g3-series_06.61.09.0003 tftp://10.58.196.5/g3-series_06.61.09.0003
Error: Couldn't open source file!

[Ali__J]

John Valentine
i did that command before but not success

Username:admin
Password:

Enterasys A4
Command Line Interface

Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.

Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com

(c) Copyright Enterasys Networks, Inc. 2011

Chassis Serial Number: 12240066905L
Chassis Firmware Revision: 03.03.01.0011

A4(su)->
A4(su)->
A4(su)->dir
Images:
==================================================================
Filename: a-series_03.03.01.0011 (Active) (Boot)
Version: 03.03.01.0011
Size: 6064128 (bytes)
Date: Thu Mar 31 06:26:44 2011
CheckSum: 818707264b41c7c00764fe4a70d7a467
Compatibility: A2H124-24, A2H123-24, A2H124-24P, A2H124-48, A2H124-48P
A2H124-24FX, A2H254-16, A4H124-24TX, A4H124-24FX, A4H254-8F8T
A4H124-24, A4H124-24P, A4H124-48, A4H124-48P

Files: Size
================================ ========
configs:
mysave.cfg 2149
logs:
current.log 5393
A4(su)->
A4(su)->copy images/a-series_03.03.01.0011 tftp://10.10.10.15/fw
Error: Couldn't open source file!
A4(su)->