Extreme Networks

Fischer_Oliver · 07-22-2016

Hello all i have the following Problem with one Device in our Network It is an CAB Label Printer connected on an X440 with Netsight After 10 Minutes the following message is in the Netsight Nac manager The session is no longer active due to: Admin-...

Fischer_Oliver · 07-22-2016

The following messages in the switch log Network Login MAC user xxxx logged in MAC xxxx port 12 VLAN(s) "", authentication Radius The authentication state of Network Login user xxxx was cleared by policy, Mac xxxx port 12 VLAN(s) "" Protocol(s) "MA...

Fischer_Oliver · 07-22-2016

Hello Oscar and Ronald there is no entry in the switch log Mac authentication is used Our X450 switches show the same message in the NAC but the CAB Label Printers on these switches are reachable after the message The Status switch from disconnecte...

Extreme Networks

User Statistics

User Activity

X440 and Netsight Nac The session is no longer active due to: Admin-Reset.

RE: X440 and Netsight Nac The session is no longer active due to: Admin-Reset.

RE: X440 and Netsight Nac The session is no longer active due to: Admin-Reset.