Hi Alex,Trying to get some additional information on this, but have you been able to confirm that the VXLAN tunnel is up or down using the 'show virtual-network remote-endpoint vxlan' command? Also assuming the enable ospf vxlan-extensions and that c...
Hi Ahmed, according to the Mininet website, FloodLight uses OpenFlow which is supported in EXOS until version 30.5. The following might provide some more insight for using OpenFlow and API usage in EXOS.https://documentation.extremenetworks.com/openf...
Hello,Could you check the 'show log' output for any 802.1x messages to see whether there are any failures or authentication attempts? The following article could be used as a guideline to compare the configuration for 802.1x: https://extremeportal.fo...
Hello Nick. It is possible that the PCs can be filtering ICMP packets, therefore not responding to ping requests. Please check the firewall on the PCs or disable the firewall entirely for testing this scenario. Also please check the 'show fdb' output...
With the config shown, we are mirroring to a Link Aggregation Group which will give the error: "Error: Port mirroring cannot be enabled on a trunk member port 1" once enabling mirror test. Native mirroring to a LAG port is not currently supported. Is...
