Extreme Networks

steverosenquist

Purchased AP5020 from ebay - was on-boarded but not connecting fully. Removed from cloudIQ, Attempting to re-onboard AP5020 with serial CV012421S-C2168A and getting 'stale record of the device was found in the redirector.' Any assistance to release...

steverosenquist · 03-26-2019

AP550/AP230's with POE and would like to utilize the usb port for a few of my 2.4ghz iot devices. Can you provide details of how to configure as I do not see the options within NG or cmd line.

steverosenquist

Reached out to Extreme IQ Support at GTAC : https://www.extremenetworks.com/support/contactProvided proof of purchase from ebay, image of back of device with serial and Matt at extreme IQ assisted and release. No further action required. Slightly d...

steverosenquist · 11-03-2022

Not sure if related but check out the following as a few good options around troubleshooting and turning on verbose debug via the CLI.: https://community.extremenetworks.com/t5/aerohive-migrated-content/ap230-signal-problem/m-p/77156 I have seen this...

steverosenquist · 03-26-2019

Keith is correct.. Reach out to aerohive support and have them remove the previous ownership and you can then proceed forward and add to your hive. If you provide them with your hive information- they will even add it for you.

Extreme Networks

User Statistics

User Activity

Onboard Extreme Network AP - stale record

AP550/AP230's with POE and would like to utilize the usb port for a few of my 2.4ghz iot devices. Can you provide details of how to configure as I do not see the options within NG or cmd line.

Re: Onboard Extreme Network AP - stale record

Re: Aerohive AP230 Help

Re: I have problems to register my AP to Hivemanager connect. Message says: Error 9 The device appears to be in use by another VHM.