Extreme Networks

Erwin_van_Hoof · 02-08-2021

For a client set-up the vendor requires us to run RSTP on the internal network. The client wants a redundant connection to thier network with MSTP configured. Is it possible running both RSTP and MSTP on the same set-up?

Erwin_van_Hoof · 09-10-2018

Hello, At a client we have one Extreme x670_G2 switch running with 3 VLAN's. vlan1 - 192.168.10.129/26 vlan2 - 192.168.11.0/26 Transit - 192.168.11.193/26 Only vlan1 has devices connected (currently), including one server - 192.168.10.133 I want ...

Erwin_van_Hoof · 02-07-2018

Hello, Problem When using 3 x670_48x switches in a stack (native) at a client, I'm experiencing high stack-port utilization. This reaches 100 percent on certain stack ports. I am using native v160 stacking. The firmware used on these switches is 15....

Erwin_van_Hoof · 11-13-2017

Hello, At a customer we are using 3 stacks of 3 x670v-48 switches. These are configured native stacking. The multicast used is PIM Sparse mode. In the log file I keep seeing the following message: Slot-2: IPv4 multicast entry not added. Hardware L...

Erwin_van_Hoof · 04-12-2017

At a client we are using 3 stacks with 3x x670v with XOS 15.4.3 configured with native stacking in V160. Between the 3 stacks we use a 40Gb connection (QSP+ with LACP L2). Each stack makes use of a rendez-vous point. rendez-vous point configuratio...

Erwin_van_Hoof · 02-08-2018

Thank you for doing the research to conclude there might be a firmware issue. We will try to update the firmware asap and see if the situation improves. Erwin

Erwin_van_Hoof · 02-07-2018

Hello Patrick, The setup is not a new setup, it has been running for a year now. The command I use for the utilization: show ports stack-ports utilization

Erwin_van_Hoof · 11-14-2017

Hello, Thanks for the information. In the first article you provide instructions to configure an IGMP snooping filter per VLAN. The example given in the article is that a certain Hardware Limitation of a table has been reached, but that is not the c...

Erwin_van_Hoof · 04-13-2017

Is there anyone who can confirm that the stream is not flowing to the master when it is initiated or joined. Thanks in advance.

Erwin_van_Hoof · 04-12-2017

Hello Patrick, Thanks for your answer. But how can I view the utilisation of a stack port?

Extreme Networks

User Statistics

User Activity

Is running RSTP and MSTP on the same set-up possible?

Access Extreme network from Cisco

x670V-48x native stacking stack port utilization issue with multicast

x670V-48x multicast L3 hardware table full

x670v stacking with RP multicast join over backbone

RE: x670V-48x native stacking stack port utilization issue with multicast

RE: x670V-48x native stacking stack port utilization issue with multicast

RE: x670V-48x multicast L3 hardware table full

RE: x670v stacking with RP multicast join over backbone

RE: x670v stacking with RP multicast join over backbone