Extreme Networks

jaime_quintana · 01-12-2016

Is something issues for configuration EAPS whit 3 stacks x460-24t

jaime_quintana · 08-17-2015

What is the best way to summarize both networks on computers BD8810 Networks are 172.22.xx 172.19.xx both in area and currently OSPF stub with the following settings BD8810-1 0.0.0.15 create ospf area 0.0.0.15 configure OSPF stub area stub NOSUMMARY...

jaime_quintana · 07-08-2015

What is average stack memory of a summit x450e-48p? Our average work stack 70% (6 switch)

jaime_quintana · 03-25-2015

There is a way to monitor change in the route table, and that this change is reflected in message logs?

jaime_quintana · 03-16-2015

How to enable telnet for specific IPS for example for ip 167.28.170.99 & 167.28.137.57

jaime_quintana · 03-26-2015

and this script , how to be configured¿?

jaime_quintana · 03-25-2015

Thank Bill , And this can be expecificado to a specific network, such as: route 10.0.0.0/8

jaime_quintana · 03-16-2015

Thank Bill

jaime_quintana · 03-16-2015

something like this: Telnet_2.pol entry AllowTheseSubnets { if match any { source-address 167.28.170.99 /32; source-address 167.28.157.37 /32; } then { permit; } } entry dontAllowTheRest { if { ; #none specified } then { deny; } }

jaime_quintana · 03-13-2015

you make reference to CYGWIN ? this appear in to Ridgeline Reference

Extreme Networks

User Statistics

User Activity

EAPS with Summit Stack X460-24T

How to summarize network in a stub area

Usage Memory Stack

There is a way to monitor change in the route table,?

How to enable telnet for specific IP?

RE: There is a way to monitor change in the route table,?

RE: There is a way to monitor change in the route table,?

RE: How to enable telnet for specific IP?

RE: How to enable telnet for specific IP?

RE: How to login to device for SSH in RIdgeline