New Contributor III
since ‎09-07-2021

User Statistics

  • 34 Posts
  • 2 Solutions
  • 0 Kudos given
  • 1 Kudos received

User Activity

Is it possible to configure an ISW switch to send syslogs to a nonstandard UDP port?
Hello,I have an ISW that I'm not too familiar with that I'm trying to configure one port to tag some VLANs and to have one untagged. For example- 123 untagged then 456, 789 tagged.I can do this easily with my Summit switches, but I can't seem to crac...
I’m trying to remove one of my switches from NAC. I’ve removed the switch from NAC, and removed most of the configuration information from the switch but I can’t seem to remove the following configuration for all of my ports. I’ve tried the typical “...
A few months ago I installed two new AP3825i and it came with loaded. When I adopted it into my network it failed to upgrade to my controller version. I never worried about it, figured on the next controller upgrade it would fix itself-...
I have a X460-G2 stack that I recently added a 4th switch to the stack. Ever since I did that I’ve been experiencing an SNMP issue. I use SNMP to monitor the switch and a few ports. At least once a day my monitoring system will report some of my moni...
Kudos from