New Contributor II
since ‎09-07-2021

User Statistics

  • 41 Posts
  • 0 Solutions
  • 0 Kudos given
  • 1 Kudos received

User Activity

I’m using 4 VSP8600 in a SPBM-Configuration. Today we experienced a network disruption although no configuration changes were made. The logs are full of these:************************************************************************************ Comma...
After updating a few x440-g2 test switches to version im unable to ssh into the switch a day after booting the new firmware. the error-message i get is:kex_exchange_identification: read: Connection reset by peerConnection reset by 172.28.32...
Hi! When i installed our SPBM-backbone consisting of 4 VSP8600 i made the mistake of not seperating VRF0 and our internal LAN. As far as i understand, VRF0 should only contain the ISIS configuration. Every other L2 or L3 VSNs should reside in differe...
We are using an SPBM-Cloud of 4 VSP 8600 as our Backbone. Two of them are connected to a layer 2 transport net in which the firewall is used as default gateway. last week we had a power shortage and a few weeks ago i rebooted the firewall at night. b...
i have reoccuring packet loss of 20s-2m and need some help debugging. we are using the following components and configuration: 4x VSP 8600 Version 200x Summit x440G2 Version The VSP are configured in an spbm cloud. Two VSPs per loca...
Kudos from