Actually, recommend using this URL to pick up the latest documentation editions:https://supportdocs.extremenetworks.com/support/documentation/extremecloud-iq-controller-latest-documentation/
The easiest way to reset configuration to default settings (factory) is to hold down the reset button (hole at the top of the AP opposite the port labels) for about 5 seconds - you'll see a change in the LED pattern. If you have access to the shell/c...
Yes. Each controller is engineered to be able to withstand the full capacity of the High-availability pair (APs and end-user sessions) in a Failover event situation.
Hi Jonathan,There are two default High-Availability modes in ExtremeCloud IQ Controller:Active/Active - Controllers automatically assign APs in a 50:50 balance ratio, keeping the APs evenly distributed between both HA peersActive/Passive - In this mo...
Hi Andre,Yes. In an High Availability setup, while AP balancing may be distributed based on HA mode (Active-Active, Active-Passive, Site-Assigned) each controller is engineered to be resilient to the whole capacity of the pair. I.e In the case of Fai...
