Hi,we actually have two V6120 in active/passive mode, all the APs are connected on the primary one, how i can switch APs to the secondary ?Regards,Jonathan
Hi,we actually have a Fabric core with 4xVSP7400 we activate STP mstp because of an interconnection any to any with a provider.We have 2 core by room and each room as an attach to the provider because of the STP one link is in Forwading and the other...
Hi Paulo,Thanks for the feedback, indeed I can force the APs to attach to one or the other controller by site, but what interests me most is to be able to do it in a global way for all my APs. I have actually 80 sites, it would be inconvenient to do ...
Hey TQU, thanks for the trace level command i can use it with the module 106 (STP). The problem is that topology changes happen randomly sometimes 5 in the same day sometimes none in 5 days. I’m not sure I can let the trace level 106 3 command run wi...
The root bridge is the VSP74 Core 1 so logically I should only receive TCNs and not TCs. Yet if I look at the statistics of the ports of my switch being the root bridge STP. I can see that : Port Number : 1/10/1Cist Port Fwd Transitions : 1Cist Port ...
I Roger,thanks for the feedback, STP Multi-Homing is in fact enable. Actually the operators infrasctructure is "transparent" and act like a wire.Currently it is the switches Fabric that blocks the redundant ports that works correctly. The problem is ...
