Extreme Networks

NetWolf · 07-01-2022

Hello Community,Yesterday I wanted to enable 802.11k on a ssid at one of our sites. In the Info box it said:Eine Meldung sagt "Enabling 802.11k on a radio may cause radio reset, all WLAN´s must have the same 11k setting, otherwise adding/removing WLA...

NetWolf · 06-01-2021

Hello Community,I started using the new Campus Controller for some of our locations.One location startet workinig with the WiFi and they had Problems with dropping WiFi connections. Is there a way to check logs on the Controller? Or any suggestions w...

NetWolf · 12-18-2020

Hello Community,coming from a Cisco Background I have some trouble understanding the Extreme Wireless Solution.Maybe you can help me with your expertise.I have two controllers with 323 AP´s connected to one controller (Controller1) as Local AP´s. The...

NetWolf · 06-02-2021

Hello Mig,okay, thanks for bringing this up.I read about the possibility to change this in the WiFi Infrastructure.But also to set the clients to a different mode is a great Idea. Thanks,Netwolf

NetWolf · 12-21-2020

Thanks you very much!I will try this out. BR NetWolf

NetWolf · 12-21-2020

Hello Stephan & Christoph,allright I was able to check that. I logged in to the second Controller and it says 313 foreign AP´s on the Dashboard. The first Controller says 313 local AP´s. In the AP Section the Second Controller shows the exact same am...

Extreme Networks

User Statistics

User Activity

(ExtremeCloud IQ Controller)Enabling 802.11k on a radio may cause radio reset, all WLAN´s must have the same 11k setting.

Sticky Clients & Dropping Connections

Extreme Controller Shows AP´s as inactive but they are pingable

Re: Sticky Clients & Dropping Connections

Re: Extreme Controller Shows AP´s as inactive but they are pingable

Re: Extreme Controller Shows AP´s as inactive but they are pingable