unfortunately the only way to workaround this issue on the older firmware is to reset the host master blade ( one with the cpu led lit )
this can be achieved using front panel button or by typing "reset x" where x is the module number of the host m...
Unfortunately , on older codes there have been rare situations where telnet sessions can become "locked" and do not release when using the disconnect command.
The only way to recover this on that firmware is to reset the blade.
i would recommend u...
Hi Franciscoo,
Out of interest , are all the old edge switches on default priority settings ? if they are then as long as you have set the priority on the root bridge to for example ,zero then there is no way that you will have an issue with root br...
published the following article to cover this in the kb in case it comes up again
https://gtacknowledge.extremenetworks.com/articles/Q_A/40Gb-QSFP-Parallel-Single-Mode-PSM-MPO-connec...
