I'm stuck on how to delete loopback / CLIP interface.And also I would like to know how to delete a VLAN IP interface without deleting the whole VLAN?RegardsChristoph
Is it possible to add static device licenses for APs and Switches to the Cloud Appliance. Or is there only the subscription based licensing model available?
What will happen to the subscription based keys if the subscription period is over. Are the ...
I'd try to find physical specifications an pictures for different IdentFi Access Point mounting options, especially the newer ones.
E.g.
WS-MBO-ART01
WS-EIO-01
WS-MBO-H01
WS-MBO-POLE01I had no luck whit the data sheets of the AP or Site Preparati...
We would like to use a SSA-T1068-0652A to gain NetFlow and MirrorN data. Do we need the S-EOS-S150 license to tunnel the mirrored data to a PurView appliance? Kind regards
Christoph
Hi,maybe it's no OSPF issue.First I would check whether the route is active in local route table of Coeur1-siteX-LTA:show iproute vr VR-specialIt it is not active, than is will not be redistributed.
Setting up an OSPF connection between Cisco IOS and EXOS is no big deal. Just take a look into the knowledge base to start:
https://gtacknowledge.extremenetworks.com/articles/How_To/Getting-started-with-OSPF-on-EXOS/
I've done it already, it's working.
If you are trunking the VLANs of different VRs on one physical port remember not to assign to port to any VR.
Kind regards
Christoph
