Extreme Networks

Hi all.I'm trying to figure how to load a series of commands in an ERS remotely, specifically for changing IP and Mgmt VLAN. The "copy tftp config" only loads binary config in the switch, and, as far I know, the "config network" command loads the con...

Hi all.I have a strange case here, or at least I've never seen such behaviour. I have a SMLT with LACP between two VSP-7254XTQ (8.10.3.0) and a final device.. In both VSP:mlt 1 enable name "Device"interface mlt 1smltlacp enable key 1flex-uni enableex...

Hi all.We have a pair of hosts in the same VLAN whose  traffic need to be directed to a next-hop different of that in the default route configured in the VSP. As we searched in the forum and diverse documentation it seems that this is only feasible u...

Hi all.I'm curious about if it's posible to make a static route better than a direct route in VOSS 8.2. In my setting we have a VLAN with the gateway *outside* the switch but with an IP configured in the switch VLAN interface, so there is a local dir...