Hi,I configured an ERS 4950 as usual and it's not the first time that I did it. but this one is not responding to icmp resquests. this switch can ping all other spbm configured switches. but it can not ping VSP (containing VRRP configurtion) ans non ...
Hello,I'd like to know if it's possible to integrate EDM Home page (only the chassis state) in an html web page (or other) by iframe (or other).Thanks for your help.
Hello,I'm trying to duplicate a config from source Switch (no SPBM) to a new one (with SPBM). Source Switch has got an IGMP configuration :interface vlan 10ip igmp snoopingip igmp send-queryip igmp snoop-querier-addr X.X.X.Xip igmp query-interval 60e...
Hello,I'm searching for OID that can give me information on power supply for ERS 4950 with this version : 7.8.1.055.I tried all MIBs that I downloaded from Extreme Networks portal, but I haven't find the right one. Thanks for your help.
hello,mgmt vlan is ok (I use default one 1)I put this line : ip address stack 10.xx.xx.xx net mask 255.225.255.0 default-gateway 10..xx.xx.254I did other tests :- install the stack without spbm, I configure only ip stack, netmask and default gateway...
Hi,Thanks for your answer. here are different connexions :on SW1 :ping all VSP --> non OKping SW2 --> OKping SW3 (non spbm) --> non OKping gateway --> non OKping other VLANs --> non OKshow isis adjacencies : VSP1 (with the right interfaces)show autot...
Hello, you have to know management IP address of your ERS, I think 192.168.10.2 by default, than you put a port in management VLAN which is VLAN 1 by default and finally, you connect you PC directly to the choosen port. you should fix the IP address ...
Hello,I found these OID for ERS 4950, 4850 and even for 4550 :CPU utilisation : .1.3.6.1.4.1.45.1.6.3.8.1.1.11.3.10.0Units number : .1.3.6.1.4.1.45.1.6.3.2.1.1.5.8Temperature : ColumnMax[.1.3.6.1.4.1.45.1.6.3.7.1.1.5/2]hope that this can help you