Extreme Networks

Leonardo_Falcon · 02-17-2017

Helllo people, I have a problem with a Traffic Shaping configuration. The situation is this: I have three branch site and there are some servers that communicate between them and they saturate the WAN bandwidth. I'd like configure the traffic shaping...

Leonardo_Falcon · 12-29-2016

Hello people, I have two switches in stack. The switches are X250e-24t and X440-48p. The version is 15.3.2.11. This stack has two ports in trunk configured in sharing to the switch core. The spanning tree is not configured in this network. One week a...

Leonardo_Falcon · 02-17-2017

Thank you. I have configured the policy in this way: create meter limit_15M configure meter limit_15M committed-rate 15 Mbps out-actions drop edit policy Rate_Limit_MAN entry rule1 { if match all{ source-address 10.19.2.201/32; d...

Leonardo_Falcon · 02-17-2017

In this article you can find one configuration of traffic shaping in egress direction using the acl filter such as the mine. https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-basic-rate-limiting-on-a-port-for-ingress-and-egre...

Leonardo_Falcon · 02-17-2017

Yes, the extreme are the Gateway. The wan is configured as a SVI. Is more correct that I configure the acl over the physical interface or over the VLAN? Now is over the physical interface. Thank you.

Leonardo_Falcon · 01-11-2017

Hi Drew, I have upgraded the version and until now the problem is not appeared. Thank you.

Extreme Networks

User Statistics

User Activity

Traffic Shaping configuration

Problem with stack between X250 - X440

RE: Traffic Shaping configuration

RE: Traffic Shaping configuration

RE: Traffic Shaping configuration

RE: Problem with stack between X250 - X440