Extreme Networks

ChristianK

I get on my 5520 stack the following error every 5 minutes<Erro:HAL.Port.Error> summitbcmReadGbicEeprom: Failed open fd=-1 errno=2(No such file or directory) open file name(/dev/s450/gbicp1) What is the background here?

ChristianK · 08-11-2025

Is there a possibility to get on a Fabric an overview of the Fabric Size?With show virtual-ist I can see if the device is working with Virtual ISTshow isis interface shows me a working ISIS Interface. To have an understanding of which ports my Fabric...

ChristianK · 06-05-2025

Can you share the needed steps to perform an archive of switches with File Transfer mode is SCP?What kind of steps are needed? I couldn't find an article here.How to setup an archive.

ChristianK · 12-23-2024

Hello,I want to add a Cisco Router to the XIQ-SE. I have on the Cisco Router only SSH available.Is it possible to add the device only with SSH to XIQ-SE?I want to use then only the SSH feature. It would be great if the SNMP errors can directly be ign...

ChristianK · 12-23-2024

We have an active Syslog configuration.Now the IP of the Syslog receiver will be changed.At which point is the IP configuration of the Syslog done?

ChristianK · 08-22-2025

I was looking for the output of the commandshow isis spbm nick-nameTo see all active members

ChristianK · 12-26-2024

It means Ping only or SNMP must work.The device only with SSH is not supported.Could this be a feature request? To have a device only with SSH when the connection is non-secure?

ChristianK · 12-26-2024

My configuration was underControl -> Access Control -> Configuration -> NotificationsMany thanks for the hint.

ChristianK · 12-23-2024

We forward the logs from XIQ-SE to our SIEM solutions.The SIEM Solutions will be changed. So I have to change the IP in the Syslog forwarding configuration.Does this make my request more clear?

ChristianK · 03-05-2024

Here https://www.powershellgallery.com/packages/XMC/ is a PowerShell Module for the XMCIt does not have all the features like the NBI.There are no plans to create or evaluate a complete module.I have this not tested against XIQ-SE.

Extreme Networks

User Statistics

User Activity

Error message on 5520 Stack

Fabric Overview

Setup Switch Archive via SCP

Adding Devices only with SSH to XIQ-SE

XIQ-SE Syslog configuration

Re: Fabric Overview

Re: Adding Devices only with SSH to XIQ-SE

Re: XIQ-SE Syslog configuration

Re: XIQ-SE Syslog configuration

Re: PowerShell Module for API / NBI