Is there a neighbouring AP on the same 5GHz channel causing this one to ‘back off’ and drop power down? Anything in the controller or individual AP logs? Any logs mentioning RADAR being detected on the same 5GHz channel? Does your channel plan allow ...
LAG = link aggregate group, typically using LACP, a bond of 2 or more links to form an aggregated link. In EXOS terms this would be done using the sharing command
MLAG = Multi (Chassis) Link Aggregation Group. A configuration that is typically appli...
Hi ar,
For the EXOS switches in a DMZ, personally i'd suggest not having an accessible switch IP on the DMZ-facing data plane side of things. Keep management of this switch only via the separated management port using SSH, SNMPv3, disabling telnet, ...
This might help:
https://gtacknowledge.extremenetworks.com/articles/How_To/Design-Considerations-when-using-EXOS-MLAG
If the MLAG'd X690s are connected to the VSB'd S8's i.e. a square layout with each device in the corner and the lines of the squar...
There are some Extreme papers I’ve seen in the past which advise against STP being used from the mlag’d uplinks, my take on it is you’d otherwise need to implement stp over the mlag isc which will cause a lot of problems.
One solution - if the vla...
