Extreme Networks

classic037 · 04-06-2021

hiAfter connecting to Aruba AP, if you use BT headset to open BT sco,ping requst time out. (100% reproduced)1. Add ssid in Aruba ap. (2.4G only)2. Connect with the ssid added through the Android device.3. Connect the bluetooth headset on the android ...

classic037 · 04-13-2021

Please help me…..Extreme Employees

classic037 · 04-09-2021

hi Ovais Qayyum 1- If you notice, when the PING drops the WiFi is still connected (at least on the handheld terminal). So, most probably the PING drop is not caused by the client connection. Can you confirm, when the BT utility is run, the IP on the...

classic037 · 04-08-2021

hi Ovais Qayyum I upgraded the FW to the AP7522-5.9.2.2-005R version and tried the test again.An issue that was 100% reproduced is not reproduced. I would like to know if the issue is not reproduced due to which fixes compared to the 5.9.1.3-007R ver...

classic037 · 04-07-2021

Hi TomaszWhat is the current wlan config and radio interface config for the AP? Are there any WLAN client devices that don’t support 5 GHz?→ No, the customer wants the AP7522 AP to use only 2.4 channels.What 2.4 GHz channel is used by the AP right no...

Extreme Networks

User Statistics

User Activity

After connecting to 2.4g only ssid, after connecting BT headset, BT SCO opn network does not respond.

Re: After connecting to 2.4g only ssid, after connecting BT headset, BT SCO opn network does not respond.

Re: After connecting to 2.4g only ssid, after connecting BT headset, BT SCO opn network does not respond.

Re: After connecting to 2.4g only ssid, after connecting BT headset, BT SCO opn network does not respond.

Re: After connecting to 2.4g only ssid, after connecting BT headset, BT SCO opn network does not respond.