Extreme Networks

hi there im getting errors on c2h124-48, error is :- unit 1 schan error: v/e=1 src=13 dst=15 opcode=20, (mem_fail_notify) is there a way to fix this, ie running firmware update.

enterasys xpedition 2400 256

are you able to tell me what the serial settings for hyperterminal would be to get into the cli prompt

when the router boots up and you run the show command the Ethernet ports show as being disabled, however when you plug in an Ethernet cable the port comes up. is there a way to enable the ports, and change the admin state, as the show port status say...