Extreme Networks

There is a python task in Site Engine called "Restart Device".  It works well and I have it schedules for 2am on Sundays when no one is here.But it only reboots the x465 and none of the x400 slots (port extenders).  The cli command to make all the de...

I have a client with only 1 vlans - the default vlan and a VoIP called ENAVoice. All the tagging is done at the phone handset. create qosprofile "QP5" configure vlan "ENAVoice" qosprofile QP5 configure dot1p type 5 qosprofile QP5 configure dot1p ty...

We are having trouble with guests completing the captive portal registration on the NAC. This is apparently a MAC-to-IP resolution issue between the EWC and the NAC. The subnet for the captive portal is 10.200.x.x and the DHCP is handled by the EWC...

We are chasing high system utilization rates at our central location. When the CPU rate is low (between 5-15%) there is no TID named USL Task. When CPU runs high (between 94-98%) there is a TID named USL Tack running between 50-80%. We have found ...

We have a mixture of 3825 and 3715 APs . After upgrading to v10 software we updated the AP firmware as usual. Trouble is we can get all 1,037 APs up to v10 firmware, wait a few days, and about 4 APs will show up with v9 firmware. Wait another day ...