Extreme Networks

Michael_P · 07-11-2019

I have an X620 setup as a core to a LAN with X440-G2 switches on the edge. I have policy working at the switches - for example: when a IP Camera is plugged in, policy assigns VLAN 13 untagged to the port, When an AP is plugged in, policy assigns VLA...

Michael_P · 07-23-2019

I think this may be solved. In the policy, under "Default Actions" I changed "Permit Traffic" to "Contain to VLAN" and set the "Contain to VLAN" to the proper VLAN (100 in this example). The client received a DHCP address and I was able to get connec...

Michael_P · 07-23-2019

This is for wired ports. DHCP is not making it to the server when the untagged vlan is dynamically assigned, but is making it to the server when the untagged vlan is statically assigned.

Michael_P · 07-15-2019

Matthew, Not blocking anything with Policy. I do not use a policy on the X620 at the core - just the X440s on the edge. configure policy profile 1 name "UPS" pvid-status "enable" pvid 4095 configure policy profile 2 name "CleartouchWindows" pvid-s...

Extreme Networks

User Statistics

User Activity

Clients on ports getting their VLANs via Policy not getting a DHCP address

Re: Clients on ports getting their VLANs via Policy not getting a DHCP address

Re: Clients on ports getting their VLANs via Policy not getting a DHCP address

Re: Clients on ports getting their VLANs via Policy not getting a DHCP address