Hello all,what are the levels, like New Contributor III and when are they reached? I have not found it. But maybe I have overlooked it.@SamPirok: Maybe it would be useful to store that somewhere, perhaps under FAQ.Many greetings
Hello community,first of all, I have searched the community and the internet and have not found anyone who has had similar problems.I describe briefly. In the test setup we have a Windows client. This is recognized by MAC address and assigned to a ro...
Hello Community,I'm a bit confused about why there are no APs displayed in Extreme Control, except for 2 APs. Maybe I am missing something. Here is some basic information for my case.- 802.1x is enabled on the ports- when I type "show netlogin" on th...
Hello community,I am a little confused about the following issue:I configured the switch management access using the following older guide (I can't find a newer one):https://extremeportal.force.com/ExtrArticleDetail?an=000081977&q=How-to-configure-N...
Hello Community,I am in the process of testing Extreme Control and am stuck.SetupAll servers and clients are running on one ESXi serverEMC 192.168.1.1 (switch port 1)ExtremeControl Engine 192.168.1.2 (I want to use the engine as radius)Switch X440 G2...
There would be the possibility to realize that via SNMP. If you have a monitoring system, you can probably add it there.You would have to get the OID that shows you the information you like. You can find the OIDs in the MIB for your EXOS version.You ...
I think that you can not adjust the rate limit. The EXOS is too closed for that. So you will not be able to identify the problem.One can of course speculate, if the number of logs is 1, that the previously logged message is probably the error that wa...