Extreme Networks

Asifi

Hello All, Firstly I hope this is the right place for this question.I was wondering if anyone knows of or can point me in the direction of a script I can use to change a PSK password on a daily basis. I am using Extreme XIQ for management of my Extr...

Asifi

Hello Community,I have a pair of 8404 VSP switches and wish to create a LAG (port channel) using 2 ports on the same switch and NOT across 2 switches. The ports are live and active and are plugged into the end device.What is the best way to do this ...

Asifi · 10-14-2024

Hello Community,I have a setup question. I have 2 sites with and Extreme 8404 core switch at each site.I have 2x top of rack switches in a port channel on each site going into their respective Extreme core ports.However, I do not have a core connect...

Asifi · 09-23-2024

Hello Community,I have an issue with Apple devices connecting to Extreme 305C AP's. The Apple devices when connecting to an Extreme 305C AP should bring up a certificate which is then trusted. This is not happening.I have 2x AP controllers in use. ...

Asifi · 03-20-2024

Hello All,I've had a look at the various Extreme documents regarding LACP on a LAG etc. I can't seem to make this work for some reason.What I have is 2x 8404C 10GB core switches and I wish to use ports 2/23 and 2/24 as a LAG with LACP.I've tried fro...

Asifi

Hi Chris,Great stuff - thank you and I will have a look at this.Thanks,Asif

Asifi

Thanks Everyone - that has done the trick :).Thanks to everyone who contributed to this.Best Regards,

Asifi

@jody998 Great - thanks for this, this has worked fine for me. A slight curveball on this, if I now want to use 2 core switch ports on 2 DIFFERENT switches what would be the process for this. I am thinking create an SMLT as split and patch the port...

Asifi

@Phil_ Great - thanks for this, this has worked fine for me. A slight curveball on this, if I now want to use 2 core switch ports on 2 DIFFERENT switches what would be the process for this. I am thinking create an SMLT as split and patch the ports ...

Asifi

@jody998 - Many thanks for this. I will get the commands together and go through this and update this thread. I will be using SSH to the switches. The ports will be static so I am assuming a static LAG will suffice for this.Lastly, there are some...

Extreme Networks

User Statistics

User Activity

Script for password change on an SSID

Create port sharing on 1 VSP switch using 2 ports

Extreme core switch and Top of rack switches

Apple devices not bringing up certificate when connecting via WIFI using Extreme AP 305C

Creating a LAG/MLT and LACP on 2 Extreme 8404C core ports

Re: Script for password change on an SSID

Re: Create port sharing on 1 VSP switch using 2 ports

Re: Create port sharing on 1 VSP switch using 2 ports

Re: Create port sharing on 1 VSP switch using 2 ports

Re: Create port sharing on 1 VSP switch using 2 ports