Hi @TimS Ok, in order to minimize the impact on your network, I can propose you to follow this article to bypass the existing shared secret for the B5 switch.https://extremeportal.force.com/ExtrArticleDetail?an=000082047You can also configure a new s...
Hi @TimS,Typically this message means that the shared secret configured on your NAC is not matching with the shared secret configured on your B5 switch. In case you are using Management Center + Control, you can check that on your Management Center, ...
Hi @Joe10,Regarding the show port vlan, where are connected the AVB devices ?Are you sure for vlan TAVB tagged on the ports ?Regarding the igmp config part, please follow the links I shared you.KR Kevin
Hi @Joe10 ,Can you run the following commands on your switch and provide me the result ?show versionshow switch show license show ports vlanRegarding your issue, you can see below several link that can help you :IGMP Querier : https://extremeportal.f...
Hi, Yes, the same CPU manufacturer Marvell (formerly Cavium) is used for X460-G2. By heart, if I remember properly, the X440-G2 uses CN7010 and X460-G2 uses CN6120. The main difference : CN7010 is a Single Core CPU and CN6120 is a Dual Core CPU.KRKev...
