Extreme Networks

IKTNH · 07-04-2024

I have setup an severity critical alarm with criteria event set to "contact lost" to be sent to my email, when a router/switch goes down. The alarm works fine, and I receive an email.But the email I receive on the alarm has not the same subject text ...

IKTNH · 07-05-2023

Hello,We are relatively new to scripting/archive in SE, and would like to have a little bit help on copy downloded device script from github, to our own Site Engine., for laer use in Archive. Need especially help with step number 2 in link below:ht...

IKTNH · 07-10-2024

Hi. Thanks for reply. Upgrade to latest version, will that solve our problem? This is a custom created alarm I made with Severity; Critical. other options: We are using outlook in Azure so dont know if that has to do with the time difference, or forw...

IKTNH · 07-06-2023

Hi, Thank you for all your help. Unfortunately it doesn't show up in the list in our system, so we have opening a GTAC support case for additional assistance.

IKTNH · 07-05-2023

Thank you. We have now managed to log into our XIQ-SE using WinSCP and navigated into the correct folder. However, when we have copied the new script file into the folder, we the dont see it in the Invertory Setting -> Device Family Definition Finena...

IKTNH · 07-05-2023

Thanks for answer, but our challenge is how do we copy the file into this location /usr/.local/Extreme_Networks/NetSight/appdata/InventoryMgr/properties/devicefiles.Do we need a special FTP/TFTP tools for this, and how do we login into SE. Can we us...

Extreme Networks

User Statistics

User Activity

Alarm and email setup

How to copy own script into XIQ-SE - for later using in Archive

Re: Alarm and email setup

Re: How to copy own script into XIQ-SE - for later using in Archive

Re: How to copy own script into XIQ-SE - for later using in Archive

Re: How to copy own script into XIQ-SE - for later using in Archive