Extreme Networks

Jeff_McLeod · 01-27-2016

configure snmp sysName "LAYER2-3_SWITCH" configure sys-recovery-level switch reset configure vlan default delete ports all configure vr VR-Default delete ports 1-5 configure vlan default delete ports 1-5 configure ...

Jeff_McLeod · 01-15-2016

I'm trying to inject a static route 192.168.12.0/22 192.168.11.253 when gateway 192.168.8.12 fails. When 192.168.8.12 is once again available, I would like to remove the 192.168.12.0/22 192.168.11.253 route and replace it with 192.168.12.0/22 192.16...

Jeff_McLeod · 01-29-2016

Haha! Hey Jarek. It looks like it was the EXOS image I was using in my virtual environment. I loaded a 15.7.x.x image and everything worked. Weird thing is; the echos respond with type 3 unreachable, but it gives me a round trip response time. Is...

Jeff_McLeod · 01-28-2016

Hey Jarek. Sorry it took me so long to get back to you, I had a Surface Pro mishap. So... I'm trying to validate all of my configurations on the virtual appliance, running 15.3.1.4 System type is Summit-PC. If I can ever get the flow-redirect succ...

Jeff_McLeod · 01-27-2016

Hey Patrick. Thanks a bunch! Nothing was hitting the access-list. But I think the problem is the Virtual Image I was using. I swapped it out for the one with 15.7.x.x code and it all works! I can even see the access list getting hit. Now my que...

Jeff_McLeod · 01-27-2016

Yes. I made the comment. The problem is; if I don't enter a static or default route, the traffic NEVER gets routed to the nexthop, it just dies. And if I'm verifying correctly, I don't ever see it hit the access-list. I definitely see the flow-re...

Jeff_McLeod · 01-18-2016

Can we open this back up? It didn't work. Due to the configurations that I was given, it's sill the same problem. The flow-redirect monitors the primary path, but never takes the primary path even when it's up. It always takes the default path wh...

Extreme Networks

User Statistics

User Activity

Why does flow-redirect not work?

Remove primary iproute and inject secondary iproute when primary path is unavailable; then reverse when primary path is available

RE: Why does flow-redirect not work?

RE: Why does flow-redirect not work?

RE: Remove primary iproute and inject secondary iproute when primary path is unavailable; then reverse when primary path is available

RE: Remove primary iproute and inject secondary iproute when primary path is unavailable; then reverse when primary path is available

RE: Remove primary iproute and inject secondary iproute when primary path is unavailable; then reverse when primary path is available