Extreme Networks

Sanktis

Hello Community,We need to document in ExtremeCloud IQ (XIQ) where our Virtual Port Extenders (VPEX) are physically located.For example, we have ten VPEX units running on a single Access Switch. These VPEX units are physically located in different o...

Sanktis · 03-03-2025

We hade to upgrade from 32.6.2.68 to 32.7.2.19.The Update was working fine and we got no issues.I Notice a Log Message during Boot <Erro:SNMPD.Error> Error: Failed to open the file /etc/snmp/extr_userinfo.cfg for readingDo i have to worry about that ...

Sanktis · 02-26-2025

Hi we have a Maas Server SystemWe need PXE Boot to Onboard new Server Systems with 2 Nics.Issue:Got a Server with 2 Nics to an Exos.Boot the Server over PXE OnboardingReboot System and Provisioning Server with Ubuntu and LACP Configuration on that 2 ...

Sanktis · 12-20-2024

How to Configure SMLT with VLACP, Flex UNI Port and FA Properly on ExosHi, we are currently using VOSS 9.0.4. Both BeBs are configured with DVR and DVR Leaf Virtual-IST.The switch cluster BeB nodes are working properly and are interconnected via an I...

Sanktis · 08-15-2024

Im New to the Extreme network World.So we are using EXOS and VOSS. Im looking now for a Language Pack for Visual Studio Code for VOSS.I've found already the EXOS and it is working fine.Did anyone found a Language Pack for VOSS?CheersFlorian

Sanktis

Hello Zdeněk,Thank you for your reply and your great work here in the Forum. I've read a lot of your posts and answers! I was hoping there was another tweak for this. Unfortunately, we have a lot of these VPEX devices across different buildings. The...

Sanktis · 07-08-2025

We changed finaly on the ubuntu site from LACP to balance-alb this works fine for that case 

Sanktis · 03-03-2025

Hi GabrielThanks for your Reply. Unfortantly i played around with that but because we have diffrent systems which are booting throught PXE i dont get it running till with that.I asked the Ubuntu Service Owner to change from LACP to balance-alb this i...

Sanktis · 12-22-2024

Good Morning First of all, thank you very much for your reply.On the dvr VIST Cluster (the both BeB VOSS Switches see Image) hast the same Bmac, LACP ID (1), the Same SMLT ID (1) and also the Same Configuration (Flex Uni, Fa, etc).As i understood fro...

Sanktis · 08-29-2024

Hi Sorry for the delay You can find the extension here:https://github.com/joxz/exos-vscodeCheers

Extreme Networks

User Statistics

User Activity

BPE / VPEX Physical Location

SNMP Error: Failed to open the file /etc/snmp/extr_userinfo.cfg for reading after update to 32.7.2.1

LACP & PXE Boot

VOSS (9.0.4) - SMLT - VLACP - FlexUni - FA - to Exos (32.6.2.68) sharing LACP

VOSS Language Pack for Visual Studio Code

Re: BPE / VPEX Physical Location

Re: LACP & PXE Boot

Re: LACP & PXE Boot

Re: VOSS (9.0.4) - SMLT - VLACP - FlexUni - FA - to Exos (32.6.2.68) sharing LACP

Re: VOSS Language Pack for Visual Studio Code