Extreme Networks

dsireseau · 02-16-2021

Hi exos experts,I’d like to graph broadcast and multicast traffic per port with snmp/zabbix for loop detection.data is present with sh port statistics* Slot-1 B05-01.2 # sh port statistics Port Statistics ...

dsireseau · 09-19-2019

Hi, I have two question about "reload device" function in "configure" screen which allows to upload switches running's configuration into xmc's database. A) Do somebody knows any reason why "reload device" action takes about 5 minutes to finish on...

dsireseau · 04-19-2022

hello,Any news about this case ?Same problem here :x440g2-12p exos 31.2.1.1 => 1- ssh stop running after reboot 2- unable to reneable ssh and generate new ssh key 3- same after new reboot 4- downgrade to 30.2.2.17 and then was able to enable...

dsireseau · 02-17-2021

hello, thanks for your answer.ELRP is configure and i’m able to detect the loop existency (we use remote logserver and graylog alerts for that) but the goal here is to find loop’s origin.all switches alerts on their uplink ports but we don’t find any...

dsireseau · 09-24-2019

Hello, It's in progress

dsireseau · 09-19-2019

Ok, that's why ssh and http(s), thanks Switches are stacked but A4 are too .... Vlan number varies with switches but stays under 15 Il tried to use snmpV1 but it's quite long too (4-5 minutes versus 8-10 with snmpV3) I'm loss  Thanks

dsireseau · 09-19-2019

Hello, thanks for your reply. Are you talking about dns configured on OS side ? If yes, it looks like ok : $nslookup 10.2.1.22 (switch IP) 22.1.2.10.in-addr.arpa name = sw22.mat.dom Https is disabled on exos but tcpdump shows https attempts durin...

Extreme Networks

User Statistics

User Activity

Snmp oid for broadcast traffic

XMC and Reload Device action

Re: SSH host key generation failed on X440G2 EXOS 31.1.1.3-patch1-1

Re: Snmp oid for broadcast traffic

Re: XMC and Reload Device action

Re: XMC and Reload Device action

Re: XMC and Reload Device action