Extreme Networks

Hi,does everyone know how to enable IP addresses to be shown doing a compass search on an 800 series switch?I found this solution on the GTAC Knowledge:https://extremeportal.force.com/ExtrArticleDetail?an=000071128but it doesn't apply to 800 series.....

Hello everyone! I need ideas to solve this question. Is there the possibility of programming D2 series switches starting from factory configuration - that is, connecting to the RJ45 switch console port - using a PC that does not have a serial COM p...

Hi everybody, I need to know If there is any CLI command (or NetSight Applications tool) I can use to check a Securestack C3 switch for HW issues. I tried the various "show port ..." commands, but they only show if ports are admin and operationally ...

Hi all, I have a strange problem regarding the management of some D2 switches using NetSight (Version: 6.1.0.159). I recently installed two D2 switches in my network where I also have C3, B5, B3 and other D2 switches; I have always deployed the same...

Hi everybody. I need some advice in order to solve a problem with Archive Mgmt on NetSight Inventory Manager (version 6.1.0.159). I have to archive some Enterasys V2H switches; they had such an old firmware that the archive process always terminat...