This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
ExtremeNorth
New Contributor III
since ‎09-07-2021
a week ago

User Statistics

  • 21 Posts
  • 2 Solutions
  • 2 Kudos given
  • 3 Kudos received

User Activity

VOSS EAPOL with NAC

04-07-2022
Does anybody have a guide that shows how to configure a VSP (VOSS) to use EAPOL when using Extreme NAC?  We have many ERS switches installed and use EAPOL w/NAC, but I have not been able to get it working on a VSP.I see that Ludo has posted a documen...

VOSS inVSN filter to limit bandwidth

09-15-2021
I read a post on how to do port rate limiting, but I would like to rate-limit a port based on the inVSN filter.  We have a 100M WAN interface where we can enable rate-limiting, but I would like to put a limit on the amount of traffic for each L3VSN. ...

Segmented Management Interface

10-08-2020
I see that VOSS 8.2.0 is released and there is now a Segmented Management Interface which says “the Management plane (management protocols) is separated from the Control Plane (routing plane) from a process and data-path perspective”.  There are thre...

Convert JUNOS config to VSP

08-11-2020
We are replacing 30+ Juniper routers with VSP’s, does anybody have experience converting the configurations?  It would be awesome if there was a converter that can input the Juniper config and output VSP commands.  (I believe PAN has a converter from...

Using NAC to Fabric attach an ERS 4900 to an ERS 5900

04-09-2019
I have ERS5900's running full fabric connect (NNI Ports) back to VSP8400''s, and I would like to use FA to connect another ERS4900 switch to an EAP enabled port. All ports on the 5900 are EAP enabled and controlled with Extreme NAC to auto provision...
Kudos given to
GTM-P2G8KFN