Extreme Networks

thommo_41 · 04-03-2019

This should be very simple, but if I want to hard wire an ATOM instead of use the wireless mesh, shouldn't plugging it in be enough? Won't it automatically use the wired interface instead of meshing?

thommo_41 · 04-03-2019

Afternoon. At the moment, I have a single network policy, for 9 AP's. 8 are in the UK, on the same site. 1 is in the US. I had an availability schedule to restrict the wireless outside of working hours, but the US site is obviously inheriting this, a...

thommo_41 · 10-09-2018

There is a complete lack of instruction on how to install the ATOM AP30's. The videos show a complete config free deployment, literally plug and play. But nowhere does it give you details on the pre-requisites. I'm still having problems now. Whilst I...

thommo_41 · 07-30-2018

I am getting emailed throughout the day at the moment, probably 100 times or more, with the same status for each AP we have - AP CONNECTION STATUS HAS CHANGEDAs far as I can see, there is no internet connectivity problems, and our firewall has no ins...

thommo_41 · 04-04-2019

Annoyingly, the switch is all configured correctly, in fact an AP250 works off the same cable to prove it's working. The ATOM is not having it at all though. The template has the Ethernet setup and enabled as an uplink. But the HM shows it as disable...

thommo_41 · 04-03-2019

Thanks Ashley, that's just the thing. I'm not sure about the Wireless profiles though, as there is a country selection (code) and a setting on the 2.4 for Europe or US - at the moment, the US is using the config as UK...

thommo_41 · 10-15-2018

FINALLY - we're there. The problem was almost certainly (but still not sure) to do with firmware. The AP250's were forced to 8.4r5, and after a reset and repeat of previous steps, it worked. All 3 ATOM's working now too.Before I quiet down, do we kno...

thommo_41 · 10-15-2018

BEAR - did you use an auto provisioning profile?Our re seller have gone through wirelessly provisioning these with me, and they fail as soon as you try and deliver an update to them. Change hostname for example, do delta update, the ATOM fails to upd...

thommo_41 · 10-10-2018

BJ - thanks for the info. I saw that in the documents and our AP's are all updated so that's one less thing to get in the way.Sam - I've unboxed all 3 ATOMS and installed them around the floor, in proximity to different APs. The AP250 devices all hav...

Extreme Networks

User Statistics

User Activity

Get ATOM to use a wired uplink if there is one plugged in?

Easiest way to have different SSID availability schedules?

AP30 ATOM Install - start to finish?

Constant email notifications - AP CONNECTION STATUS HAS CHANGED

Re: Get ATOM to use a wired uplink if there is one plugged in?

Re: Easiest way to have different SSID availability schedules?

Re: AP30 ATOM Install - start to finish?

Re: AP30 ATOM Install - start to finish?

Re: AP30 ATOM Install - start to finish?