ExtremeCloud IQ- Site Engine & Extreme Management Center

 View Only
  • 1.  Hardware Inventory Report

    Posted 06-16-2022 13:03

    Is there a way to create a report that list which devices have a single power supply installed vs a redundant power supply? or perhaps report the serial number of the power supply unit installed in each of my devices so I would know if only one serial number is reports a second power supply needs to be installed?

    I can see the information stored in the device view, I just cant figure how to run a report against all my devices so I dont have to go into the device view on each device and manually check.

  • 2.  RE: Hardware Inventory Report

    Posted 06-21-2022 17:33
    Hi - What type of device, EOS or EXOS? If it's EOS, we have 100's of EOS K10's, S4's and even some N7's still in production. We use a flexview run on a  schedule in XMC to print table information and email it to us for each chassis so we can see the number of installed power supplies and their status.

  • 3.  RE: Hardware Inventory Report

    Posted 06-22-2022 11:31
    Is this a built in Flexview or a custom one you guys built\found?  I have a majority of EOS 7100s, but we are starting to swap them out with EXOS 5520s.

  • 4.  RE: Hardware Inventory Report

    Posted 06-22-2022 11:57
    I believe it was something custom, I am sure GTAC or our sales engineer must have helped us put it together. It puts everything in a spreadsheet:

    Here is the code in the FlexView if you want to take a look:

    <?xml version="1.0" encoding="UTF-8"?>
    <flextablelist version="">
    <flextable autoExportCsvTextDelineation="DQUOTE" autoExportFrequencyUnit="Minutes" autoExportFormat="HTML" showHorizontalLines="true" autoExportFilename="" autoExportFileManagement="Replace" highlightBackground="153,255,255,255" class="com.enterasys.netsight.console.client.flexview.FvTable" id="ctChasPowerSupplyState" columnSelectionAllowed="false" autoCreateColumnsFromModel="false" autoExportAllowed="false" autoExportCsvFieldDelimiter="Comma">ctChasPowerSupplyState
    <column comparator="com.ets.flextable.col.IntStringComparator" id="0" sortOrder="descending" class="com.enterasys.netsight.console.client.flexview.FvColumn" fixed="true" hidden="true">ReqID
    <column comparator="com.ets.nac.tables.TbCompOid" id="1" width="156" sortOrder="ascending" class="com.enterasys.netsight.console.client.flexview.FvColumn" fixed="true" sorted="true" modelIndex="1">IP Address
    <dataField>OID::IP Address:::SNMP::IP Address</dataField></column>
    <column comparator="com.ets.nac.tables.TbCompOid" id="2" sortOrder="descending" class="com.enterasys.netsight.console.client.flexview.FvColumn" fixed="true" hidden="true" modelIndex="2">Instance
    <column comparator="com.ets.flextable.col.IntStringComparator" id="101" width="195" sortOrder="descending" class="com.enterasys.netsight.console.client.flexview.FvColumn" modelIndex="3">ctChasPowerSupplyNum
    <column comparator="com.enterasys.netsight.console.client.flexview.FvCompMibEnum" id="100" width="319" sortOrder="descending" class="com.enterasys.netsight.console.client.flexview.FvColumn" modelIndex="4">ctChasPowerSupplyState

  • 5.  RE: Hardware Inventory Report
    Best Answer

    Posted 06-22-2022 08:16
    Try right clicking the device/devices --> Flexview --> Entity MIB --> Physical Entity Listing.


  • 6.  RE: Hardware Inventory Report

    Posted 06-22-2022 11:36
    This looks like it might work for my needs.  Thanks for the help.  Still learning about these FlexView options.

  • 7.  RE: Hardware Inventory Report

    Posted 2 days ago
    Edited by Sam Pirok 16 hours ago
    thanks for guidance i also clear my query through this discussion