AP 7522E from express UI to full

  • 0
  • 2
  • Question
  • Updated 1 year ago
  • Answered
Hi!!

many month ago can pass from express to complete like interface in AP6532. How is possible now!?

Thx.
Photo of Rodrigo Cortes

Rodrigo Cortes

  • 490 Points 250 badge 2x thumb

Posted 1 year ago

  • 0
  • 2
Photo of Andrew Webster

Andrew Webster

  • 1,918 Points 1k badge 2x thumb

Hi Rodrigo,

The Express version AP (7522E) cannot be converted to full version.

Photo of Rodrigo Cortes

Rodrigo Cortes

  • 490 Points 250 badge 2x thumb
Understood! in this case is better option use switch controller por advance option!?

Thx
Photo of Andrew Webster

Andrew Webster

  • 1,918 Points 1k badge 2x thumb

It depends on your use case...

A controller is required if you have more than 24 APs or want to mix different models of APs in the same deployment (eg: 7502E and 7522E).  In this case you would need VX9000E, NX5500E, etc.

If you want full Enterprise features, you cannot use any Express products in the deployment.   The same rule applies as above, if you have more than 24 APs of the same kind or want to mix different models (eg: AP7532 + AP7502).  In this case you would need VX9000, NX5500, etc.

Photo of Robert Zarzycki

Robert Zarzycki, Employee

  • 5,376 Points 5k badge 2x thumb
Rodrigo if you have a non-express AP that is running swift UI you can change it to the enterprise UI. See below 
How to change SwiftUI to Enterprise
Photo of Rodrigo Cortes

Rodrigo Cortes

  • 490 Points 250 badge 2x thumb
THX!!!

This is!!!!

:)