Extreme AP Configuration

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
I am trying to setup an AP 3825i to perform a site survey. I am trying to access the CLI to set the config, however, I apparently do not have the default login credentials (admin/admin123 don't work). Does anyone have the correct default login credentials?
Photo of Shane Quintard

Shane Quintard

  • 82 Points 75 badge 2x thumb

Posted 4 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 51,328 Points 50k badge 2x thumb
admin/new2day but even that will not solve the problem as the AP has no standalone mode

The only way to do it is... short version....
- connect AP to WLAN appliance
- setup a wlan service/topology/VNS that is bridge@AP untagged
- set the antenna. static channel, tx power and all the other radio settings
- in "AP properities" in the advanced section select "Maintain client sessions in event of poll failure" and "Restart service in the absence of controller"

Now you'd unplug the AP and use it for a site survey.
(Edited)
Photo of Shane Quintard

Shane Quintard

  • 82 Points 75 badge 2x thumb
ah...ok. thought the AP did have standalone mode. will set up per advised recommendation.

thanks.
Photo of Vellachery, Sumeesh

Vellachery, Sumeesh, Employee

  • 3,288 Points 3k badge 2x thumb
Shane,

The following KB Article would help you to configure an AP for site survey:-

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-setup-an-IdentiFi-thin-access-point...
Photo of arabinda mohanty

arabinda mohanty

  • 190 Points 100 badge 2x thumb
hi

 Is this possible to configure AP 3805i in standalone?
If it possible please let me know.... 
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 51,328 Points 50k badge 2x thumb
Yes&No.

There is no standalone mode but as mentioned above you'd configure a controller AP to act like a standalone AP.

That is possible with all controller APs also with the AP3805i.
Photo of arabinda mohanty

arabinda mohanty

  • 190 Points 100 badge 2x thumb
ok, we can configure ap standalone by controller....right
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 51,328 Points 50k badge 2x thumb
You can configure "Maintain client sessions in event of poll failure"  via the controller GUI.
Photo of arabinda mohanty

arabinda mohanty

  • 190 Points 100 badge 2x thumb
ok got it 
thank u