This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
ExtremeWireless (General)
Questions and discussions about wireless in general
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Start a conversation

How to enable openflow open-fail mode ?

We opened the case.I got an answer.When the connection with the controller is disconnected, it operates in secure-fail mode.The flow disappears on the switch.We need open-fail mode.I want to keep the flow even if the connection to the controller is l...

ISW Radius over Http/https

Community, I configured the switch for Radius over ssh and telnet. However, when I setup the switch for to use radius over http/https I get the following error: Insufficient Privilege Level The web page is non-accessible. Please use the valid priv...

No Intenet Connection

We have Aerohive AP250’s and Extreme B5 and X450 switches.  On certain AP’s, devices (mostly Chromebooks) can connect to the SSID, receive IP Address, subnet mask and gateway via DHCP but  do not have an internet connection.  If the user takes the de...

Resolved! Devices disconnecting and reconnecting to same AP

Devices constantly disconnecting from one access point and immediately reconnecting to the same access point every couple of minutes,Either with Rx disassoc reason 8 <assoc-leave> or Tx disassoc reason 101 <n/a>I believe reason 8 is the AP deauthing ...

Jagster by • New Contributor
  • 1994 Views
  • 1 replies
  • 0 kudos

AP7532

Have loaded static IP into the AP but can not open using the IP. Want to configure the AP for home network for additional WI-FI coverage. Any help would be appreciated.

Harvinder by • New Contributor
  • 2514 Views
  • 5 replies
  • 0 kudos
GTM-P2G8KFN